Foundation Repair Pros, LLC of Denver
CALL US NOW: (719) 239-3629

How to Waterproof a Basement | DIY SquidGee Dry System

http://waterproof.com
Basement waterproofing made easy! We’ve helped over 20,000 homeowners waterproof their basement for under ,000 with our contractor-grade do-it-yourself basement waterproofing channel called the SquidGee Dry System. Our system has proven itself over the past 30 years as the most dependable and affordable do-it-yourself remedy to a wet basement.

Get a quick quote for your basement: http://waterproof.com/carttwo/basement-waterproofing-cost.html

Learn more about the DIY SquidGee Dry System: http://waterproof.com/squidgee-dry-system.html

For more information about our waterproofing products visit our website at http://waterproof.com or call us at (651) 644-2000 and we will answer you questions!

“Hi, I’m Joel with Waterproof.com and today I’m going to show you how to install the SquidGee Dry System. The SquidGee Dry System is an ideal remedy for a basement leaking water through the joint where the floor and walls meet. The do-it-yourself system collects the water and quietly drains it to the sump pump or floor drain. Never worry about a wet leaky basement again! The SquidGee Dry System will last for decades. The only skill needed is the ability to follow directions. Begin by cleaning the floor to remove all dirt and dust. Using the SealOnce Adhesive apply a tall, thick bead of adhesive to the bottom of the main section. Turn the main section back over and set it in place. Press gently in place for 30 seconds. Next, apply the finishing seal followed by slicking down the bead of adhesive to create a watertight seal. Seal the butt-joint connectors to create a continuous channel. Install and bond in place the pre-molded inside and outside corners. Finish by draining the SquidGee Dry System to your sump pump or floor drain. Enjoy your dry basement for years to come. If you have any questions please visit our website Waterproof.com or call 1-800-828-2947.”